G850FQJVU2ANH8 Android 4.4.4 KitKat Firmware Last
Updated on 17-Sep-2014. Users of Samsung GalaxyAlpha SM-G850FQ can
now update their Smartphone with the latest JVU2ANH8 Android 4.4.4
KitKat officialfirmware. Samsung started rolling out an OTA update about the
firmware. The latest firmware build versionnumber is G850FQJVU2ANH8.
The Galaxy Alpha is the latest high end android Smartphone by
Samsung, recently released withAndroid 4.4 KitKat out of the box and this is
the first official Android 4.4.4 KitKat firmware update for
SM-G850FQ. If you own the Smartphone and not yet updated this latest firmware,
then update the same using our simple tutorial below. The below step by step
guide will help you to download and install the G850FQJVU2ANH8 Android
4.4.4 KitKat Firmware manually through Odin.
If your Galaxy Alpha G850FQ running on Android 4.4.2
KitKat then update this latest Android 4.4.4 KitKat firmware to
enjoy some new features, performance enhancement and bug fixes.
So, want to update your Galaxy Alpha G850FQ to the latest G850FQJVU2ANH8 Android
4.4.4 KitKat firmware? To install in official way, either you can go
for OTA (over the air) from Settings-About Phone-Software Update or download firmware through
the Samsung Kies utility. However, most of us prefer manual way to
update official firmware. So, in this article you’ll find step by step
manual guide to update the latest Android 4.4.4 JVU2ANH8 firmware on
your Galaxy Alpha G850FQ through Odin.
Important Note:
"The firmware is released only for the Samsung
Galaxy Alpha SM-G850FQ model, so don’t try this in any other android
device. Check your device model number from Settings-About Phone.
Also the tutorial is based on Windows PC. Follow all the pre-requisites,
procedures and steps carefully to avoid breaking your phone".
Download G850FQJVU2ANH8 Android 4.4.4 KitKat Official
Firmware
Samsung rolled out the firmware for the following
countries. The firmware which are unbranded or not locked to any
carrier, no matter of which country or region, can be flashed on any Galaxy
Alpha SM-G850FQ model.
[Firmware for rest of the countries and carrier will be added here when
available]
Pre-Requisites:
Check battery percentage, your device should have at
least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer
Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
If you are using any Custom ROM such as- CyanogenMod,
Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this
official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced
by Stock Recovery
After flashing official firmware, your device will no
longer belongs to rooted device. However you can root your device any time
after flashing the firmware.
All the above pre-requisites are very important and must
follow before proceed to installation guide. Hope you get all the above points.
Now, go through the below tutorial to install Android 4.4.4
G850FQJVU2ANH8 official firmware on Galaxy Alpha G850FQ.
How to Install Android 4.4.4 KitKat Official Firmware on
Galaxy Alpha G850FQ through Odin:
Download Android 4.4.4 JVU2ANH8 Firmware for Galaxy
Alpha G850FQ from the above list
Download Odin
3.09
Switch off your phone and boot Galaxy Alpha G850FQ into Download Mode by
pressing and holding the Volume Down+Home+Power buttons (long
press until the boot screen appear), now press Volume Up key to
proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and
run the Odin3 v3.09.exe file as an administrator (Right
click on the .exe file and click on Run as administrator)
Now connect your Galaxy Alpha G850FQ to your computer via
USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and“Added!” text at the message box. This means your device
has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F.
Reset Time” options are checked.
Now, extract the downloaded firmware zip file,
you’ll find a firmware file with extension.tar.md5
In Odin screen, click on AP (PDA in older Odin) button and
select the firmware file with.tar.md5 extension (The firmware file
look something like: G850FQXXDLJ5_G850FQODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the
installation process, wait few moments.
Once completed, you would see “PASS!” message in
ID:COM port having green background
Your phone should automatically reboot after
completion
You can now disconnect your phone from computer
Finish
Congratulations! your Galaxy Alpha G850FQ is now
updated to the latest and official Android 4.4.4 KitKat firmware.
Hope you successfully done the update process. If you followed everything as
mentioned in the above tutorial, then your your Galaxy Alpha should now running
on the latest Android 4.4.4 KitKat build version G850FQJVU2ANH8. You can
confirm the firmwareupdate details from Settings-About Phone. If you
find any problem with the above tutorial anddownload link, feel free
to contact with us using the comment form below..
0 comments:
Post a Comment