Home | Looking for something? Sign In | New here? Sign Up | Log out

Friday, September 19, 2014

Galaxy G110BXXU0ANG2 Android 4.4.2 KitKat Firmware for Galaxy Pocket 2 Duos SM-G110B- How to Install

/ On : 7:45 AM
G110BXXU0ANG2 Android 4.4.2 KitKat Firmware Last Updated on 19-July-2014. Samsung Galaxy Pocket 2 Duos SM-G110B users can now update their device with the latest XXU0ANG2 Android 4.4.2 KitKat officialfirmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build versionnumber is G110BXXU0ANG2. The Galaxy Pocket 2 Duos G110B Smartphone recently released with Android 4.4.2 KitKat and already received official firmware update. If you own the device and not yet updated this latestfirmware, then update the same using our simple tutorial below. The below guide will help you to download and install the G110BXXU0ANG2Android 4.4.2 KitKat Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
As the Galaxy Pocket 2 Duos SM-G110B released with Android 4.4.2 Kitkat firmware, you can only expect few bug fixes and performance enhancement with this latest update. So, want to update your Galaxy Pocket 2 Duos G110B to the latest G110BXXU0ANG2 Android 4.4.2 KitKat firmware?To install in official way, either you can go for OTA update as mentioned above or downloadfirmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latestAndroid 4.4.2 XXU0ANG2 firmware on your Galaxy Pocket 2 Duos G110B through Odin.
Important Note:
"The firmware is released only for the Samsung Galaxy Pocket 2 Duos SM-G110B model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Android 4.4.2 KitKat G110BXXU0ANG2 Official Firmware Download List
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Pocket 2 Duos SM-G110B model.

Trinidad and TobagoG110BXXU0ANG2_G110BUUB0ANG2_TTT.zip

[Firmware for rest of the countries and carrier will be added here when available]
Previous Firmware Build:
Pre-Requisites:
Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.2 G110BXXU0ANG2 official firmware on Galaxy Pocket 2 Duos G110B.

How to Install Android 4.4.2 KitKat Official Firmware on Galaxy Pocket 2 Duos G110B through Odin:


Download Android 4.4.2 XXU0ANG2 Firmware for Galaxy Pocket 2 Duos G110B from the above list

Download Odin 3.09
Switch off your phone and boot Galaxy Pocket 2 Duos G110B into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Pocket 2 Duos G110B to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and“Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (Thefirmware file look something like: G110BXXDLJ5_G110BODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish
Congrats! you have completed the tutorial to update Android 4.4.2 KitKat official firmware on Galaxy Pocket 2 Duos SM-G110B. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Pocket 2 Duos should now running on the latest Android 4.4.2 KitKat build version XXU0ANG2. You can confirm thefirmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

0 comments:

Post a Comment

Popular Posts