G313FXXU0ANH2 Android 4.4.2 KitKat Firmware Last Updated on
26-Sep-2014. Download and update the latest XXU0ANH2 Android 4.4.2 KitKat
official firmware on Samsung SM-G313F. Samsung recently started rolling
out an OTA update about the firmware. The latest firmware build
version number isG313FXXU0ANH2. The Samsung SM-G313F recently announced by
Samsung with Android 4.4.2 Kitkat out of the box and already received official firmware
update. If you own the device and yet to update your device
with this latest firmware, then update the same using our simple tutorial
below. The below guide will help you to download and install theG313FXXU0ANH2
Android 4.4.2 KitKat firmware manually through Odin.
As the Samsung SM-G313F released with Android
4.4.2 KitKat, you can only expect few bug fixes and performance enhancement
with this latest update. So, want to update your Samsung
SM-G313F to the latest G313FXXU0ANH2 Android 4.4.2 KitKat firmware? To
install in official way, either you can go for OTA (over the air)
from Settings-About Phone-Software Update. or download firmware
through the Samsung Kies utility. However, most of us prefer manual
way to update official firmware. So, in this article you’ll find step
by step manual guide to update the latest Android 4.4.2 XXU0ANH2
firmware on your Samsung SM-G313F through Odin.
Important Note:
"The firmware is released only for the Samsung
Samsung SM-G313F model, so don’t try this in any other android device.
Check your device model number from Settings-About Phone. Also the
tutorial is based on Windows PC. Follow all the pre-requisites,
procedures and steps carefully to avoid breaking your phone".
Download G313FXXU0ANH2 Android 4.4.2 KitKat Official
Firmware
Samsung rolled out the firmware for the following countries.
The firmware which are unbranded or not locked to any carrier, no matter of
which country or region, can be flashed on anySamsung SM-G313F model.
[Firmware for rest of the countries and carrier will be added here when
available]
Previous Firmware Build:
Pre-Requisites:
Check battery percentage, your device should have at least 60% battery
power
Turn on USB Debugging mode, go to Settings-Developer Options-USB
Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your
computer- Download Samsung USB Driver
Points to be noted:
If you are using any Custom ROM such as- CyanogenMod,
Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official
Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced
by Stock Recovery
After flashing official firmware, your device will no longer
belongs to rooted device. However you can root your device any time after
flashing the firmware.
All the above pre-requisites are very important and must
follow before proceed to installation guide. Hope you get all the above points.
Now, go through the below tutorial to install Android 4.4.2 G313FXXU0ANH2
official firmware on Samsung SM-G313F.
How to Install Android 4.4.2 KitKat Official Firmware on
Samsung SM-G313F through Odin:
Download Android 4.4.2 XXU0ANH2 Firmware for Samsung
SM-G313F from the above list
Download Odin 3.07
Switch off your phone and boot Samsung SM-G313F into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and
run the Odin3 v3.07.exe file as an administrator(Right click on
the .exe file and click on Run as administrator)
Now connect your Samsung SM-G313F to your computer
via USB cable
In Odin3 screen, you should see a COM Port
number like “0:[COM7]” at ID:COM section and“Added!” text at the
message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F.
Reset Time” options are checked.
Now, extract the downloaded firmware zip
file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on PDA button and select the
firmware file with .tar.md5 extension(The firmware file look something
like: G313FXXDLJ5_G313FODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the
installation process, wait few moments.
Once completed, you would see “PASS!” message in
ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish
0 comments:
Post a Comment