G850SKSU2ANI1 Android 4.4.4 KitKat Firmware Last
Updated on 26-Sep-2014. Users of Samsung Galaxy Alpha SM-G850S can
now update their Smartphone with the latest KSU2ANI1 Android 4.4.4 KitKat officialfirmware.
Samsung recently started rolling out an OTA update about the firmware.
The latest firmware build version number is G850SKSU2ANI1. The Galaxy
Alpha is the latest high end android Smartphone by Samsung, recently
released with Android 4.4 KitKat out of the box and this is the first
official Android 4.4.4 KitKat firmwareupdate for SM-G850S. If you own
the Smartphone and not yet updated this latest firmware, then update the
same using our simple tutorial below. The below step by step guide will
help you to download and install the G850SKSU2ANI1 Android
4.4.4KitKat Firmware manually through Odin.
If your Galaxy Alpha G850S running on Android 4.4.2 KitKat then
update this latest Android 4.4.4KitKat firmware to enjoy some new
features, performance enhancement and bug fixes.
So, want to update your Galaxy Alpha G850S to the latest G850SKSU2ANI1
Android 4.4.4 KitKatfirmware? To install in official way, either
you can go for OTA (over the air) from Settings-About Phone-Software
Update or download firmware through the Samsung Kies utility.
However, most of us prefer manual way to update official firmware.
So, in this article you’ll find step by stepmanual guide to update
the latest Android 4.4.4 KSU2ANI1 firmware on your Galaxy
Alpha G850Sthrough Odin.
Important Note:
"The firmware is released only for the Samsung
Galaxy Alpha SM-G850S model, so don’t try this in any other android
device. Check your device model number from Settings-About Phone. Also the
tutorial is based on Windows PC. Follow all the pre-requisites, procedures and
steps carefully to avoid breaking your phone".
Download G850SKSU2ANI1 Android 4.4.4 KitKat Official
Firmware
Samsung rolled out the firmware for the following
countries. The firmware which are unbranded or not locked to any
carrier, no matter of which country or region, can be flashed on any Galaxy
Alpha SM-G850S model.
Previous Firmware Builds:
[Firmware for rest of the countries and carrier will be added here when
available]
Pre-Requisites:
Check battery percentage, your device should have at least 60% battery
power
Turn on USB Debugging mode, go to Settings-Developer
Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your
computer- Download Samsung USB Driver
Points to be noted:
If you are using any Custom ROM such as- CyanogenMod,
Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this
official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced
by Stock Recovery
After flashing official firmware, your device will no
longer belongs to rooted device. However you can root your device any time
after flashing the firmware.
All the above pre-requisites are very important and must
follow before proceed to installation guide. Hope you get all the above points.
Now, go through the below tutorial to install Android 4.4.4 G850SKSU2ANI1
official firmware on Galaxy Alpha G850S.
How to Install Android 4.4.4 KitKat Official Firmware on
Galaxy Alpha G850S through Odin:
Download Android 4.4.4 KSU2ANI1 Firmware for Galaxy
Alpha G850S from the above list
Download Odin
3.09
Switch off your phone and boot Galaxy Alpha G850S into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and
run the Odin3 v3.09.exe file as anadministrator (Right click
on the .exe file and click on Run as administrator)
Now connect your Galaxy Alpha G850S to your
computer via USB cable
In Odin3 screen, you should see a COM Port
number like “0:[COM7]” at ID:COM section and“Added!” text at the
message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F.
Reset Time” options are checked.
Now, extract the downloaded firmware zip
file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on AP (PDA in older Odin) button
and select the firmware file with.tar.md5 extension (The firmware file
look something like: G850SXXDLJ5_G850SODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the
installation process, wait few moments.
Once completed, you would see “PASS!” message in
ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish
0 comments:
Post a Comment