G750FXXU1ANGD Android 4.4.4 KitKat Firmware for Galaxy Mega 2 SM-G750F - How to Install

G750FXXU1ANGD Android 4.4.4 KitKat Firmware Last Updated on 17-Sep-2014. Download and update theXXU1ANGD Android 4.4.4 KitKat official firmware onSamsung Galaxy Mega 2 SM-G750F. Samsung started rolling out an OTA update about the firmware. The latest firmware build version number isG750FXXU1ANGD. The Galaxy Mega 2 G750F recently released by Samsung with Android 4.4.4 KitKat out of the box and this is the first official firmware update. If you own the device and not yet updated this latest official firmware, then update the same using our simple tutorial below. The below step by step guide will help you to download and flash the latestG750FXXU1ANGD Android 4.4.4 KitKat Firmware manually through Odin.

As the Galaxy Mega 2 G750F already running on Android 4.4.4 KitKat, you can only expect few bug fixes (if any) and performance enhancement with this latest firmware update.

So, want to update your Galaxy Mega 2 G750F to the latest XXU1ANGD Android 4.4.4 KitKatfirmware? For official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.4.4 G750FXXU1ANGD firmware on your Galaxy Mega 2 G750F through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Mega 2 SM-G750F model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Download G750FXXU1ANGD Android 4.4.4 KitKat Official Firmware

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Mega 2 SM-G750F model.

Malaysia: G750FXXU1ANGD_G750FOLB1ANGD_XME.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM

Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.4 G750FXXU1ANGD official firmware on Galaxy Mega 2 G750F.

How to Install Android 4.4.4 KitKat Official Firmware on Galaxy Mega 2 G750F through Odin:

Download Android 4.4.4 XXU1ANGD Firmware for Galaxy Mega 2 G750F from the above list

Download Odin 3.09

Switch off your phone and boot Galaxy Mega 2 G750F into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

Now connect your Galaxy Mega 2 G750F to your computer via USB cable

In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and“Added!” text at the message box. This means your device has been detected by Odin3.

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5

In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (Thefirmware file look something like: G750FXXDLJ5_G750FODDDLI7_INU.tar.md5)

Now, click on the Start button to begin the installation process, wait few moments.

Once completed, you would see “PASS!” message in ID:COM port having green background

Your phone should automatically reboot after completion

You can now disconnect your phone from computer

Finish

So, you have just finished the tutorial to update Android 4.4.4 KitKat official firmware on Galaxy Mega 2 SM-G750F. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.4.4 Jelly Bean build version XXU1ANGD. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.