S5280XXANG2 Android 4.1.2 Jelly Bean Firmware Last
Updated on 17-Sep-2014. Samsung Galaxy Star GT-S5280 users can
now update their phone with the latestXXANG2 Android 4.1.2 Jelly Bean
official firmware. Samsung started rolling out an OTA update about the
firmware. The latest firmware build version number isS5280XXANG2. The Galaxy
Star was released withAndroid 4.1.2 Jelly Bean and yet to receive Android 4.2.2 Jelly Bean or any further android
version. This is the latest available firmware for the device. If you
own the Smartphone and not yet updated this latest firmware,
then update the same using our simple tutorial below. The below guide
will help you todownload and install the S5280XXANG2 Android
4.1.2 Jelly Bean firmware manually through Odin. You can also check
latest available firmware for your device through OTA (over the air) fromSettings-About
Phone-Software Update.
As the Galaxy Star S5280 already running on Android 4.1.2 Jelly Bean, you can only expect few bug
fixes and performance enhancement. So, want to update your Galaxy Star
S5280 to the latest XXANG2 Android 4.1.2 Jelly Bean firmware? To
install in official way, either you can go forOTA update as mentioned
above or download firmware through the Samsung Kies utility.
However, most of us prefer manual way to update official firmware. So, in
this article you’ll find step by step manual guide to update the latest Android
4.1.2 S5280XXANG2 firmware on yourGalaxy Star S5280 through Odin.
Important Note:
"The firmware is released only for the Samsung
Galaxy Star GT-S5280 model, so don’t try this in any other android device.
Check your device model number from Settings-About Phone. Also thetutorial is
based on Windows PC. Follow all the pre-requisites, procedures and steps
carefully to avoid breaking your phone".
Download S5280XXANG2 Android 4.1.2 JB Official Firmware
Samsung rolled out the firmware for the following
countries. The firmware which are unbranded or not locked to any
carrier, no matter of which country or region, can be flashed on any Galaxy
Star GT-S5280 model.
[Firmware for rest of the countries and carrier will be
added here when available]
Previous Firmware Builds:
Pre-Requisites:
Check battery percentage, your device should have at least 60% battery
power
Turn on USB Debugging mode, go to Settings-Developer
Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your
computer- Download Samsung USB Driver
Points to be Noted:
If you are using any Custom ROM such as- CyanogenMod,
Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this
official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced
by Stock Recovery
After flashing official firmware, your device will no
longer belongs to rooted device. However you can root your device any time
after flashing the firmware.
All the above pre-requisites are very important and must
follow before proceed to installation guide. Hope you get all the above points.
Now, go through the below tutorial to install Android 4.1.2
S5280XXANG2 official firmware on Galaxy Star S5280.
How to Install Android 4.1.2 Jelly Bean Official Firmware on
Galaxy Star S5280 through Odin:
Download Android 4.1.2 XXANG2 Firmware for Galaxy
Star S5280 from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy Star S5280 into Download
Mode by pressing and holding the Volume Down+Home+Power buttons (long
press until the boot screen appear), now press Volume Up key to
proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and
run the Odin3 v3.07.exe file as an administrator(Right click on
the .exe file and click on Run as administrator)
Now connect your Galaxy Star S5280 to your
computer via USB cable
In Odin3 screen, you should see a COM Port
Make sure that, only the “Auto Reboot” and “F.
Reset Time” options are checked.
Now, extract the downloaded firmware zip file,
you’ll find a firmware file with extension.tar.md5
In Odin screen, click on PDA button and select the firmware file
with .tar.md5 extension(The firmware file look something like:
S5280XXDLJ5_S5280ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the
installation process, wait few moments.
Once completed, you would see “PASS!” message in
ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish
Congrats! you just completed the tutorial to update Android
4.1.2 Jelly Bean official firmware on Galaxy Star GT-S5280. Hope you
successfully done the update process. If you followed everything as mentioned
in the above tutorial, then your Galaxy Star should now running
on the latest Android 4.1.2 Jelly Bean build version XXANG2. You can
confirm the firmware update details from Settings-About Phone.
If you stuck in any point or find any issue with the download link,
then feel free to contact with us using the comment form below.
.png)
0 comments:
Post a Comment