Samsung Galaxy G313MUUBU0ANH4 Android 4.4.2 KitKat Firmware for Galaxy Ace NXT SM-G313MU - How to Install

G313MUUBU0ANH4 Android 4.4.2 KitKat Firmware Last Updated on 8-Sep-2014. Download and update the latest UBU0ANH4 Android 4.4.2 KitKat official firmwareon Samsung Galaxy Ace NXT SM-G313MU. Samsung recently started rolling out an OTA update about thefirmware. The latest firmware build version number isG313MUUBU0ANH4. The Galaxy Ace NXT recently announced by Samsung with Android 4.4.2 Kitkat out of the box and already received official firmware update. This is another update for SM-G313MU. If you own the device and yet to update your device with this latestfirmware, then  update the same using our simple tutorial below. The below guide will help you to download and install the G313MUUBU0ANH4 Android 4.4.2 KitKat firmware manually through Odin.

As the Galaxy Ace NXT SM-G313MU released with Android 4.4.2 KitKat, you can only expect few bug fixes and performance enhancement with this latest update. So, want to update your Galaxy Ace NXT SM-G313MU to the latest G313MUUBU0ANH4 Android 4.4.2 KitKat firmware? To installin official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update.  or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.4.2 UBU0ANH4 firmware on your Galaxy Ace NXT SM-G313MUthrough Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Ace NXT SM-G313MU model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Download G313MUUBU0ANH4 Android 4.4.2 KitKat Official Firmware

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Ace NXT SM-G313MU model.

Colombia (Comcel): G313MUUBU0ANH4_G313MUUWA0ANH2_COM.zip

Argentina (Personal): G313MUUBU0ANH4_G313MUPSN0ANH2_PSN.zip

Brazil (Claro): G313MUUBU0ANH4_G313MUZTA0ANH1_ZTA.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build:

G313MUUBU0ANH1 Android 4.4.2 KitKat Firmware for SamsungSM-G313MU- How to Install

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM

Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.2 G313MUUBU0ANH4 official firmware on Galaxy Ace NXT SM-G313MU.

How to Install Android 4.4.2 KitKat Official Firmware on Galaxy Ace NXT SM-G313MU through Odin:

Download Android 4.4.2 UBU0ANH4 Firmware for Galaxy Ace NXT SM-G313MU from the above list

Download Odin 3.07

Switch off your phone and boot Galaxy Ace NXT SM-G313MU into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator(Right click on the .exe file and click on Run as administrator)

Now connect your Galaxy Ace NXT SM-G313MU to your computer via USB cable

In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and“Added!” text at the message box. This means your device has been detected by Odin3.

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5

In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: G313MUXXDLJ5_G313MUODDDLI7_INU.tar.md5)

Now, click on the Start button to begin the installation process, wait few moments.

Once completed, you would see “PASS!” message in ID:COM port having green background

Your phone should automatically reboot after completion

You can now disconnect your phone from computer

Finish

That's all the above steps to update Android 4.4.2 KitKat official firmware on Galaxy Ace NXT SM-G313MU. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy Ace NXT SM-G313MU should now running on the latestAndroid 4.4.2 KitKat build version UBU0ANH4. You can confirm the firmware update details fromSettings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.