Home | Looking for something? Sign In | New here? Sign Up | Log out

Monday, September 8, 2014

Samsung Galaxy S6310NXXANG1 Android 4.1.2 Jelly Bean Firmware for Galaxy Young GT-S6310N - How to Install

/ On : 7:19 AM
S6310NXXANG1 Android 4.1.2 Jelly Bean Firmware Last Updated on 8-Sep-2014. Samsung Galaxy Young GT-S6310N users can now update their Smartphone with the latest XXANG1 Android 4.1.2 Jelly Bean officialfirmware. Samsung recently rolled out an OTA update about the firmware. The latest firmware build version number is S6310NXXANG1. The Galaxy Young was released in the month of February 2013 with Android 4.1.2 Jelly Bean. Samsung is yet to release Android 4.2.2 Jelly Bean or any further android version for the device. If you own the Smartphone and not yet updated any latest firmware, then update this latest firmware using our simple tutorial below. The below guide will help you to download and install the S6310NXXANG1 Android 4.1.2 Jelly Bean Firmwaremanually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
As the Galaxy Young already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Young S6310N to the latest S6310NXXANG1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through theSamsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 XXANG1firmware on your Galaxy Young S6310N through Odin.
Important Note:
"The firmware is released only for the Samsung Galaxy Young GT-S6310N model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Download S6310NXXANG1 Android 4.1.2 Jelly Bean Official Firmware
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any GalaxyYoung GT-S6310N model.
[Firmware for rest of the countries and carrier will be added here when available]
Previous Firmware Builds:
Pre-Requisites:
Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S6310NXXANG1 official firmware on Galaxy Young S6310N.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310N through Odin:

Download Android 4.1.2 XXANG1 Firmware for Galaxy Young S6310N from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy Young S6310N into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator(Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Young S6310N to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and“Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: S6310NXXDLJ5_S6310NODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish
Congrats! you have completed the tutorial to update Android 4.1.2 Jelly Bean official firmware onGalaxy Young GT-S6310N. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Young should now running on the latest Android 4.1.2 Jelly Bean build version XXANG1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the downloadlink, then feel free to contact with us using the comment form below.

0 comments:

Post a Comment

Popular Posts