How To Root Samsung Galaxy S3 SCH-R530C using Odin how to install

Root Samsung Galaxy S3 SCH-R530C using Odin

Step 1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step. http://goo.gl/nvrBN4

DOWNLOAD USB DRIVER

Step 2: Download and extract the root files on your computer. After extracting you will be able to see the following files:

Download Root File LINK 1  LINK 2

Step 3: Now, Switch off your Smartphone.

Step 4: After switching-off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Zoom Left and Power button at same time for 5-8 seconds until download mode is active.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Zoom Right key to continue.

Step 6: Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step#2) on your computer. Then connect your Smartphone to the computer.

Step 7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.

Step 8: Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step#2). http://goo.gl/nvrBN4

Step 9: Now, click on the Start button in Odin to begin the Flashing.

Step 10: Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Galaxy S3 SCH-R530C. Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process Smartphone will re-boot automatically.

Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Step 12: Now, to make sure you have successfully rooted your Samsung Galaxy S3 SCH-R530C, open Applications Menu on your Smartphone and Find SuperSU App. If this app exist on your Smartphone then it means you have successfully rooted your device. Congratulations.

Optional: You can also verify that your device is successfully rooted or not by Root Checker Application.

Root N7100XXUFNH2 Android 4.4.2 Stock Firmware On Galaxy Note 2 GT-N7100 - Simple Tutorial & download

A simple method to root N7100XXUFNH2 Android 4.4.2 KitKat Firmware is now available at NasirTech. Samsung Galaxy Note 2 GT-N7100 recently get updated to the N7100XXUFNH2 4.4.2 KitKat Firmware. If you yet to update the firmware, then update the same by following this link- N7100XXUFNH2 Android 4.4.2 KitKat Firmware for Galaxy Note 2GT-N7100 - How to Install. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root XXUFNH2 4.4.2 KitKat Firmware running on Galaxy Note 2 GT-N7100.Continue reading the tutorial for complete guide.

After updating official firmware, your device no longer belongs to rooted device. So, after officialfirmware update, many of us prefer to root our device to enjoy some additional features thatunrooted android device doesn't offer. With a rooted android device, you can install apps that askroot permission, flash various custom ROMs, install MODs and tweak various features. Rootremoves default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of RootingAndroid Phone.

So, want to root Galaxy Note 2 GT-N7100 Running N7100XXUFNH2 4.4.2 KitKat Firmware?Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We'll use Odin software to flash the root file.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

This rooting tutorial is only applicable for Samsung Galaxy Note 2 GT-N7100 model (t03g). So, don't try this in any other android device. Check your device model number from-Settings-About Phone. 

Rooting voids your phone's manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.

This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Note 2 GT-N7100 running  N7100XXUFNH2 4.4.2 KitKat firmware.

Steps to Root Galaxy Note 2 GT-N7100 Running N7100XXUFNH2 4.4.2 KitKat through Odin:

Download CF-Auto-Root for Galaxy Note 2 N7100 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtn7100.zip

Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip

Now, Switch off your phone and boot Galaxy Note 2 N7100 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

Now connect your Galaxy Note 2 N7100 to your computer via USB cable

In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

Now, click on the AP (PDA in older Odin) button and select the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file.

Finally, click on the Start button to begin the rooting process, wait few moments.

Once completed, you would see “PASS!” message in ID:COM port having green background

Your phone should automatically reboot after completion

You can now disconnect your phone from computer

Finish

Congrats! You have completed the tutorial to root Galaxy Note 2 N7100 running N7100XXUFNH2 4.4.2 KitKat Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 2 N7100 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.

Note3 Root N900W8UBUCNI1 Android 4.4.2 Stock Firmware On Galaxy Note 3 SM-N900W8 - Simple Tutorial

A simple method to root N900W8UBUCNI1 Android 4.4.2 KitKat Firmware is now available at NasirTech.Samsung Galaxy Note 3 SM-N900W8 recently get updated to the N900W8UBUCNI1 4.4.2 KitKat Firmware. If you yet to update the firmware, then update the same by following this link- N900W8UBUCNI1 Android 4.4.2 KitKat Firmware for Galaxy Note 3 SM-N900W8 - How to Install. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root UBUCNI1 4.4.2 KitKat Firmware running on Galaxy Note 3 SM-N900W8. Continue reading the tutorial for complete guide.

After updating official firmware, your device no longer belongs to rooted device. So, after officialfirmware update, many of us prefer to root our device to enjoy some additional features thatunrooted android device doesn't offer. With a rooted android device, you can install apps that askroot permission, flash various custom ROMs, install MODs and tweak various features. Rootremoves default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of RootingAndroid Phone.

So, want to root Galaxy Note 3 SM-N900W8 Running N900W8UBUCNI1 4.4.2 KitKat Firmware?Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We'll use Odin software to flash the root file.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

This rooting tutorial is only applicable for Samsung Galaxy Note 3 SM-N900W8 model (hltecan). So, don't try this in any other android device. Check your device model number from- Settings-About Phone. 

Rooting voids your phone's manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.

This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Note 3 SM-N900W8 running  N900W8UBUCNI1 4.4.2 KitKat firmware.

Steps to Root Galaxy Note 3 SM-N900W8 Running N900W8UBUCNI1 4.4.2 KitKat through Odin:

Download CF-Auto-Root for Galaxy Note 3 N900W8 and extract the Zip file: CF-Auto-Root-hltecan-hlteub-smn900w8.zip

Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip

Now, Switch off your phone and boot Galaxy Note 3 N900W8 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

Now connect your Galaxy Note 3 N900W8 to your computer via USB cable

In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

Now, click on the AP (PDA in older Odin) button and select the CF-Auto-Root-hltecan-hlteub-smn900w8.tar.md5 file.

Finally, click on the Start button to begin the rooting process, wait few moments.

Once completed, you would see “PASS!” message in ID:COM port having green background

Your phone should automatically reboot after completion

You can now disconnect your phone from computer

Finish

Congrats! You have completed the tutorial to root Galaxy Note 3 N900W8 running N900W8UBUCNI1 4.4.2 KitKat Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 3 N900W8 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.

Samsung Galaxy S7562 Root In Mmc Card File Download

Put Supersu apk in extsdcard of ur phone

2. Boot in download(odin) mode by pressing power+vol. down+home and leave power button when samsung logo appears after that press vol. up to enter dwnld mode.

3. Connect your phone to pc via usb and open odin.. it will show added when successfully connected.

4. flash recovery file by clicking on pda and selecting recovery.tar. md5 file.

5. Press start and wait ur phone will restart and wait until pass appears on odin.

6.Shut down phone again then press Vol. up+Home+Power button leave power button when logo appears.

7. Now As kernel is not yet patched the recovery will open but white screen will appears to u but it is actually cwm recovery up and running in background

8. Now as u cant see cwm u have to write these instruction on a page which I am about to tell or save them

Press vol. down button one time

Then power button

Now u have entered in install zip from sd card menu

Now again press power button now u have to choose zip from sd card u

press volume down 2 times and then press power button

Now u have selected supersu..zip

Now press 7 times vol. down and then power button

Cwm recovery will flash the zip

Wait for a minute or so and u will have installed supersu app.

9. The hard part is over now take battery out then put back in and start phone normally.

10.When phone is booting it will display android is upgrading message at boot it means phone is rooted and su binary is installed.

Super-Su

UPDATE-SuperSU-By ashraf_bcs - Download - 4shared

CWM

S7262 recovery by ashraf_bcs - Download - 4shared

How To Root M919UVUFNH7 Android 4.4.4 Stock Firmware On T-Mobile Galaxy S4 SGH-M919 - Simple Tutorial

A simple method to root M919UVUFNH7 Android 4.4.4firmware is now available at NasirTech. Samsung GalaxyS4 SGH-M919 (T-Mobile USA) recently get updated to the M919UVUFNH7 4.4.4 KitKat Firmware. If you yet to update the firmware, then update the same by following this link- M919UVUFNH7 Android 4.4.4 KitKat Firmware for T-Mobile GalaxyS4 SGH-M919 - How to Install. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to rootUVUFNH7 4.4.4 KitKat Firmware running on Galaxy S4SGH-M919. Continue reading the tutorial for complete guide.

After updating official firmware, your device no longer belongs to rooted device. So, after officialfirmware update, many of us prefer to root our device to enjoy some additional features thatunrooted android device doesn't offer. With a rooted android device, you can install apps that askroot permission, flash various custom ROMs, install MODs and tweak various features. Rootremoves default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.

So, want to root Galaxy S4 SGH-M919 Running M919UVUFNH7 4.4.4 KitKat Firmware? Continuereading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We'll use Odinsoftware to flash the root file.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

This rooting tutorial is only applicable for Samsung Galaxy S4 SGH-M919 model (jfltetmo). So, don't try this in any other android device. Check your device model number from-Settings-About Phone. 

Rooting voids your phone's manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.

This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy S4 SGH-M919 running  M919UVUFNH7 4.4.4 KitKat firmware.

Steps to Root Galaxy S4 SGH-M919 Running M919UVUFNH7 4.4.4 KitKat through Odin:

Download CF-Auto-Root for Galaxy S4 M919 and extract the Zip file: CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip

Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip

Now, Switch off your phone and boot Galaxy S4 M919 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

Now connect your Galaxy S4 M919 to your computer via USB cable

In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

Now, click on the AP (PDA in older Odin) button and select the CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5 file.

Finally, click on the Start button to begin the rooting process, wait few moments.

Once completed, you would see “PASS!” message in ID:COM port having green background

Your phone should automatically reboot after completion

You can now disconnect your phone from computer

Finish

Congrats! You have completed the tutorial to root Galaxy S4 M919 running M919UVUFNH7 4.4.4 KitKat Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy S4 M919 should now rooted and you havecomplete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.

Pre-Rooted Stock Firmware to Root Galaxy S Duos 2 GT-S7582- Installation Guide & Download

Samsung Galaxy S Duos 2 GT-S7582 users those who wish to root their device can now update their device with this Pre Rooted Android 4.2.2 Jelly Bean Stockfirmware. The Galaxy S Duos 2 recently released by Samsung with Android 4.2.2 JB out of the box and already get many official firmware update. This Pre-Rooted stock firmware is based on latest official firmware, tested and released by senior XDA Developers member Chirtagh. If you own the device and wish to root with this pre-rooted firmware, then do the same using our simple tutorial below. The below guide will help you to download and flash the Pre-Rooted Android 4.2.2 stock firmware on Galaxy S Duos 2 S7582 manually through Odin.

Important Note:

"The pre-rooted firmware is released only for the Samsung Galaxy S Duos 2 GT-S7582 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. We and the developer of this Pre-Rooted firmwareare not responsible if any undesirable result comes out after flashing this firmware. Follow this guide solely on your own risk. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Download Pre-Rooted Android 4.2.2 Firmware

PreRooted Firmware for GT-S7582 (605 MB)

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USBDriver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM

Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 Pre-Rooted firmware on Galaxy S Duos 2 S7582.

How to Install Android 4.2.2 Jelly Bean Pre-Rooted Firmware on Galaxy S Duos 2 S7582 through Odin:

 

Download Pre-Rooted Firmware for Galaxy S Duos 2 S7582 from the above Download section

Download Odin 3.09

Switch off your phone and boot Galaxy S Duos 2 S7582 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

Now connect your Galaxy S Duos 2 S7582 to your computer via USB cable

In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and“Added!” text at the message box. This means your device has been detected by Odin3.

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

Now, extract the downloaded pre-rooted firmware zip file, you'll get Odin flashable firmwarefile which is "pre_rooted_GT-S7582.tar".

In Odin screen, click on AP (PDA in older Odin) button and select the "pre_rooted_GT-S7582.tar" file

Now, click on the Start button to begin the installation process, wait few moments.

Once completed, you would see “PASS!” message in ID:COM port having green background

Your phone should automatically reboot after completion

You can now disconnect your phone from computer

Finish

Congrats! you have completed the tutorial to install Android 4.2.2 Jelly Bean official Pre-Rootedfirmware on Galaxy S Duos 2 GT-S7582. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy S Duos 2 should now running on the Rooted Android 4.2.2 Jelly Bean firmware. You can check the firmware details from Settings-About Phone. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below or head over to the original thread at Forum XDA.

Samsung Galaxy Root S7582XXUANA1 Android 4.2.2 Stock Firmware On Galaxy S Duos 2 GT-S7582- Simple Tutorial & Download

A simple method to root S7582XXUANA1 Android 4.2.2Jelly Bean Firmware is now available at NasirTech.Samsung Galaxy S Duos 2 GT-S7582 recently get updated to the S7582XXUANA1 4.2.2 Jelly BeanFirmware. If you yet to update the firmware, then update the same by following this link- S7582XXUANA1 Android 4.2.2 for Galaxy S Duos 2 GT-S7582 StockFirmware- How to Install. Hope you updated this latestfirmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root XXUANA1 4.2.2 Jelly Bean Firmwarerunning on Galaxy S Duos 2 GT-S7582. Continue reading the tutorial for complete guide.

After updating official firmware, your device no longer belongs to rooted device. So, after officialfirmware update, many of us prefer to root our device to enjoy some additional features thatunrooted android device doesn't offer. With a rooted android device, you can install apps that askroot permission, flash various custom ROMs, install MODs and tweak various features. Rootremoves default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of RootingAndroid Phone.

So, want to root Galaxy S Duos 2 GT-S7582 Running S7582XXUANA1 4.2.2 Jelly Bean Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The rooting tool (vRoot) we used in this tutorial is safe and have nearly 100% success rate. Don't required Odin or any other software to complete the root process.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

This rooting tutorial is only applicable for Samsung Galaxy S Duos 2 GT-S7582 model. So, don't try this in any other android device. Check your device model number from- Settings-About Phone. 

Rooting voids your phone's manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.

This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging 

(If Developers Option is hidden then go to Settings- About Phone and Tap the build number for 7 times in one go)

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy S Duos 2 GT-S7582 running  S7582XXUANA1 4.2.2 Jelly Bean firmware.

Steps to Root Galaxy S Duos 2 GT-S7582 Running S7582XXUANA1 4.2.2 Jelly Bean through vRoot:

1) Download vRoot and install it and launch the program.

2) Now, connect your Samsung Galaxy S Duos 2 S7582 to computer via USB cable.

 

3) vRoot application will automatically detect your device.

4) Finally click on the Root button to start the rooting process.

5) Once completed successfully, vRoot application will reboot the phone automatically.

 

6) SuperSU installed and your device is rooted now.

Congrats! You have completed the tutorial to root Galaxy S Duos 2 GT-S7582 running S7582XXUANA1 4.2.2 Jelly Bean Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy S Duos 2 S7582 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.

Root Samsung G7102XXUBNG4 Android 4.4.2 Stock Firmware On Galaxy Grand 2 Duos SM-G7102- Simple Tutorial & Download

A simple method to root G7102XXUBNG4 Android 4.4.2 KitKat Firmware is now available at NasirTech. SamsungGalaxy Grand 2 Duos SM-G7102 recently get updated to the G7102XXUBNG4 4.4.2 KitKat Firmware. If you yet to update the firmware, then update the same by following this link- G7102XXUBNG4 Android 4.4.2 KitKat Firmware for Galaxy Grand 2Duos SM-G7102- How to Install. Hope you updated this latest firmware on your device and now you can root the same using our simpletutorial below. The below guide will help you to rootXXUBNG4 4.4.2 KitKat Firmware running on GalaxyGrand 2 Duos SM-G7102. Continue reading the tutorial for complete guide.

After updating official firmware, your device no longer belongs to rooted device. So, after officialfirmware update, many of us prefer to root our device to enjoy some additional features thatunrooted android device doesn't offer. With a rooted android device, you can install apps that askroot permission, flash various custom ROMs, install MODs and tweak various features. Rootremoves default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.

So, want to root Galaxy Grand 2 Duos SM-G7102 Running G7102XXUBNG4 4.4.2 KitKat Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We'll use Odin software to flash the root file.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

This rooting tutorial is only applicable for Samsung Galaxy Grand 2 Duos SM-G7102 model (ms013g). So, don't try this in any other android device. Check your device model number from- Settings-About Phone. 

Rooting voids your phone's manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.

This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed toinstallation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Grand 2 Duos SM-G7102 running  G7102XXUBNG4 4.4.2 KitKat firmware.

Steps to Root Galaxy Grand 2 Duos SM-G7102 Running G7102XXUBNG4 4.4.2 KitKat through Odin:

 

Download CF-Auto-Root for Galaxy Grand 2 Duos G7102 and extract the Zip file- 

CF-Auto-Root-ms013g-ms013gxx-smg7102.zip.

Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip

Now, Switch off your phone and boot Galaxy Grand 2 Duos G7102 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

Now connect your Galaxy Grand 2 Duos G7102 to your computer via USB cable

In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

Now, click on the AP (PDA in older Odin) button and select the "CF-Auto-Root-ms013g-ms013gxx-smg7102.tar.md5" file.

Finally, click on the Start button to begin the rooting process, wait few moments.

Once completed, you would see “PASS!” message in ID:COM port having green background

Your phone should automatically reboot after completion

You can now disconnect your phone from computer

Finish

Congrats! You have completed the tutorial to root Galaxy Grand 2 Duos G7102 running G7102XXUBNG4 4.4.2 KitKat Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Grand 2 Duos G7102 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.